Princess Cinderella 1 UVDTF - 4 inch

These UVDTF are double sided, same quality, however if sticking onto a transparent flat smooth surface, the imagery will be visible both sides.

Our UV DTF cup wraps require ZERO weeding and apply in seconds!  They are fully waterproof and when cared for properly, will last the life of the cup.  These can be applied to any smooth, hard surface.  Hand washing required.

Application Instructions:

1.  Remove back layer of film

2.  Align the UV dtf onto your glass and firmly press the transfer onto the cup surface.

3.  Using a craft squeegee, go over the transfer, removing any air bubbles as you go. 

4.  Carefully peel up the top layer of film, working your way around the cup, and watching to ensure the design doesn't lift as well.  If you find that it is lifting, squeegee the wrap with the top film again, and re-peel.

5.  If air bubbles are present after removing the top film, you can use a small pin to pop them.  

6.  Enjoy your new cup!  Please hand wash.

Remember that with anything, practice makes perfect!  

**Please note that on images, colours may vary due to screen colour, the images are digitally composed to show you the graphics on a Frosted Glass Can and fit lovely on 16oz Glass Cans.